DESCRIPTION
The SANIGRIND is a system that allows up to 3 connections to install a complete bathroom up to 18-Feet below the sewer line, or even up to 150-Feet away from a soil stack. This is a grinder unit only and is designed to work with a standard bottom outlet toilet. It can handle effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection). It can be installed in many locations such as, a loft/attic, upper floor, ground floor, basement and even a garage. It is also designed to handle accidental flushing of sanitary articles; such as sanitary napkins, q-tips, dental floss, etc. In commercial installations, plumbing codes require an elongated bowl to be installed with this system. The operating cycle for the SANIGRIND varies depending upon the discharge pipe run configuration. In addition, the SANIGRIND will also discharge gray water from a variety of other sanitary fixtures, such as: a sink, a bathtub/shower, a urinal and even a washing machine. When adding a bathtub/shower, there should be a height difference between the side inlet of the pump and the base of the bathtub/shower. This height difference should be of 6-Inch or 8-Inch(recommended), allowing for the installation of a P-trap and the required 1/4-Inch per foot gravity flow toward the pump unit. The wastewater form other sanitary fixtures is discharged into the SANIGRIND via two 1-1/2inch inlets on either side of the housing. The discharge elbow on top of the SANIGRIND can be rotated 360 Degree depending on the discharge installation. A non-return valve (included in assembly) prevents backflow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. The vent system should be a two-way air vent. The use of mechanical vents, air admittance valves, or similar devices are not permitted as these are considered one-way air vent systems.
FEATURES
Build a complete bathroom and more for residential and commercial applications ; Vertical pumping up to 18-Feet and 150-Feet horizontally ; Great for retrofitting applications ; Designed to work with standard botton outlet toilets not supplied by Saniflo ; Designed for heavy use
